There's no simpler way to spruce up the outside of your house than with a few new window shutters. New window shutters bring a simple, clean line to your home's exterior, brightening your windows and giving your home a polished, complete look.

Installation Instructions

1. Measure the window and make sure that the window opening is square. If the window is not square, you will be required to taper the shutter to fit the opening.

2. Cut the shutters to fit the opening. If you cannot find a shutter that will fit your window exactly, choose a shutter that is slightly larger than the opening. If you need to trip more than ¾” from the shutter, cut all of it from the left or bottom sides. If you need to trim more than ¾ inch from the side, cut half from each side. Use the same procedure in trimming the height of the shutter.

3. Hinge the shutter with non-mortising hinges. Use two shutter hinges for shutters 30 inches or less in height. Use three hinges for shutters from 30 – 48 inches high. Be sure and place the hinges on the opposite side of the desired shutter opening.

4. Install the latch on the opposite side of the hinges. The latch is often installed in the centre of the shutter. In some applications it may be desirable to install the latch near the top or the bottom of the shutter. For example, in a room used by small children you may wish to install the latch near the top of the shutter.

5. The installation tools needed include a miter, radial arm or table saw; a jointer, planer or a hand plane; screwdriver; square, paint brush; tape measure; pencil; the shutters, non-mortising hinges, screws, fine sandpaper and touch-up paint or varnish.